Set allow-remote-requests=yes servers=8.8.8.8Īdd address=172.16.0.0/12 list=PRIVATE_NETWORKSĪdd address=192.168.0.0/16 list=PRIVATE_NETWORKSĪdd action=accept chain=input comment=:::::::::Established/Related \Īdd action=accept chain=input comment=:::::::::GRE in-interface-list=WAN \Īdd action=accept chain=input comment=:::::::::L2TP dst-port=1701 \Īdd action=accept chain=input comment=:::::::::IPsec dst-port=500,4500 \Īdd action=accept chain=input comment=:::::::::IPsec in-interface-list=WAN \Īdd action=accept chain=input comment=:::::::::Winbox/SSH dst-port=8291,22 \ Pppoe_isp1 password=*** use-peer-dns=yes user=*Īdd allow=pap,mschap1 disabled=no interface=ether6-wan name=pppoe_isp2 \Īdd interface=ether2 name=eth2-vlan99 vlan-id=99Īdd interface=ether2 name=eth2-vlan100 vlan-id=100Īdd interface=ether7 name=eth7-vlan99 vlan-id=99Īdd interface=ether7 name=eth7-vlan100 vlan-id=100Īdd interface=ether7 name=eth7-vlan200 vlan-id=200 Set comment=Upl_SNR_sw2Īdd allow=pap,mschap1 disabled=no interface=ether1-wan max-mtu=1480 name=\ Where and what to change for RouterOS 7? /interface bridge As I understand it, somewhere need to change routes / something else for the new OS7? The config that works now is below. I would like upgrade RouterOS 6 to RouterOS 7, everything went fine, all interfaces went up, but the Internet did not appear for users.
0 Comments
Leave a Reply. |